SICA 12 D 1,5 CS
8Ω
Full-range
Nominal diameter | 12″ / 318 mm |
Resonance | 62 Hz |
Q factor | 0.75 |
Sensitivity | 95.6 dB |
Linear excursion | ± 2.7 mm |
Program Power | 260 W |
.jpg)
.jpg)
.jpg)
- Sensitivity (1W, 1m, infinite baffle) SPL1W 95.6dB
- Frequency response 65 - 15000Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 62Hz
- Mechanical quality factor QMS 18.30
- Electrical quality factor QES 0.78
- Total quality factor QTS 0.75
Large signal parameters
- Maximum linear excursion xmax 2.7mm
- Air volume displaced at xmax VD 133cm³
- Power handling P 130W
- Program power Pmax 260W
Voice Coil
- Nominal impedance Z 8Ω
- DC resistance RE 5.1Ω
- Inductance (1kHz) LE 0.35mH
- VC Diameter 38mm
- Winding height HVC 8mm
- Winding material Copper
- Former material Kapton
Magnet
- Flux density B 1.21T
- Force factor Bl 9.51N/A
- Motor constant Bl/√RE 4.21N/√W
- Weight 1.1kg
- Material Ferrite
Diaphragm
- Effective diameter 250mm
- Effective area SD 491cm²
- Moving mass MMS 35.5g
- Moving mass (without air load) MMD 27.4g
- Material Paper
Suspensions
- Stiffness KMS 5.38N/mm
- Compliance CMS 186µm/N
- Equivalent volume to the compliance VAS 63.5L
- Mechanical resistance RMS 0.76N·s/m
- Surround material Paper – Integrated
Dimensions
- Nominal diameter 12″
- 318mm
- Overall diameter 318mm
- Baffle cutout diameter 287mm
- Overall depth 135mm
- Volume occupied by the driver (estimated) 1.9L
- Net weight 3.7kg
- Frame material Pressed Sheet Steel
.png)
.png)
Export this driver to a simulation software:
Closed Box Simulator·





