Jensen Mod 10-35

• Sensitivity (1W, 1m, infinite baffle) SPL1W 98dB

Thiele & Small parameters

• Resonance frequency (free air) fS 105Hz
• Mechanical quality factor QMS 16.90
• Electrical quality factor QES 2.65
• Total quality factor QTS 2.29

Large signal parameters

• Maximum linear excursion xmax 1.5mm
• Air volume displaced at xmax VD 50cm³
• Power handling P 35W
• Program power Pmax 70W

Voice Coil

• Nominal impedance Z 16Ω
• DC resistance RE 12.0Ω
• Inductance (1kHz) LE 3.6mH
• VC Diameter 25mm
• Winding material Copper
• Former material Kapton

Magnet

• Flux density B 1.1T
• Force factor Bl 6.9N/A
• Motor constant Bl/√RE 1.99N/√W
• Weight 0.27kg
• Material Ferrite

Diaphragm

• Effective diameter 205mm
• Effective area SD 330cm²
• Moving mass MMS 15.7g
• Moving mass (without air load) MMD 11.3g
• Material Paper

Suspensions

• Stiffness KMS 6.85N/mm
• Compliance CMS 146µm/N
• Equivalent volume to the compliance VAS 22.3L
• Mechanical resistance RMS 0.61N·s/m
• Surround material Integrated Paper

Dimensions

• Nominal diameter 10″
• 259mm
• Overall diameter 259mm
• Volume occupied by the driver (estimated) 0.45L
• Net weight 1.13kg
• Frame material Pressed Sheet