LaVoce SSF082.00L
8Ω
Subwoofer
| Nominal diameter | 8″ / 200 mm |
| Resonance | 52 Hz |
| Q factor | 0.49 |
| Sensitivity | 86.4 dB |
| Linear excursion | ± 9.2 mm |
| Program Power | 700 W |
.jpg)
Specifications
- Sensitivity (1W, 1m, infinite baffle) SPL1W 86.4dB
- Frequency response 50 - 500Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 52Hz
- Mechanical quality factor QMS 9.94
- Electrical quality factor QES 0.52
- Total quality factor QTS 0.49
Large signal parameters
- Maximum linear excursion (one way) xmax 9.2mm
- Maximum excursion before damage xlim 14.7mm
- Air volume displaced at xmax VD 202cm³
- Power handling P 350W
- Program power Pmax 700W
Voice Coil
- Nominal impedance Z 8Ω
- DC resistance RE 5.2Ω
- Inductance (1kHz) LE 2.51mH
- VC Diameter 51mm
- Winding height HVC 23.5mm
- Winding material Copper Clad Aluminium
- Former material Glass Fiber
Magnet
- Force factor Bl 14.7N/A
- Motor constant Bl/√RE 6.43N/√W
- Air gap height HAG 10mm
- Diameter 140mm
- Height 20mm
- Material Ferrite
Diaphragm
- Effective diameter 167mm
- Effective area SD 220cm²
- Moving mass MMS 66.3g
- Moving mass (without air load) MMD 64g
- Material Water Resistant Treated Paper
Suspensions
- Stiffness KMS 6.94N/mm
- Compliance CMS 144µm/N
- Equivalent volume to the compliance VAS 9.84L
- Mechanical resistance RMS 2.18N·s/m
- Surround material Rubber
Dimensions
- Nominal diameter 8″
- 200mm
- Volume occupied by the driver 1L
- Net weight 4.1kg
- Frame material Steel
.png)
.png)
Export this driver to a simulation software:
Closed Box Simulator·
Speakerbench
WinISD
Basta!
Hornresp
QSpeakers
SpeakerSim
MfbLabs
Amplion.jpg.webp)
.png.webp)
.jpg.webp)