B&C Speaker 18SW115
4Ω
8Ω
Subwoofer
Nominal diameter | 18″ / 460 mm |
Resonance | 32 Hz |
Q factor | 0.30 |
Sensitivity | 94.1 dB |
Linear excursion | ± 14 mm |
Program Power | 3400 W |
.png)
.png)
- Sensitivity (1W, 1m, infinite baffle) SPL1W 94.1dB
- Frequency response 35 - 1500Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 32Hz
- Mechanical quality factor QMS 5.60
- Electrical quality factor QES 0.32
- Total quality factor QTS 0.30
Large signal parameters
- Maximum linear excursion xmax 14mm
- Air volume displaced at xmax VD 1694cm³
- Power handling P 1700W
- Program power Pmax 3400W
Voice Coil
- Nominal impedance Z 8Ω
- DC resistance RE 5.3Ω
- Inductance (1kHz) LE 1.9mH
- VC Diameter 116mm
- Winding height HVC 34mm
- Winding material Copper
- Former material Glass Fibre
Magnet
- Flux density B 1.16T
- Force factor Bl 30.3N/A
- Motor constant Bl/√RE 13.2N/√W
- Air gap height HAG 14mm
- Material Neodymium Inside Slug
Diaphragm
- Effective diameter 393mm
- Effective area SD 1210cm²
- Moving mass MMS 275g
- Moving mass (without air load) MMD 246g
- Material Waterproof Both Sides
Suspensions
- Stiffness KMS 11.1N/mm
- Compliance CMS 90µm/N
- Equivalent volume to the compliance VAS 187L
- Mechanical resistance RMS 9.87N·s/m
- Spider material Silicone
Dimensions
- Nominal diameter 18″
- 460mm
- Overall diameter 460mm
- Baffle cutout diameter 422mm
- Overall depth 242mm
- Flange thickness 16mm
- Mounting depth 226mm
- Volume occupied by the driver 10.5L
- Net weight 11.9kg
.png)
.png)
.png)
Export this driver to a simulation software:
Closed Box Simulator·





