D.A.S. Audio 15H
8Ω
Low frequency
| Nominal diameter | 15″ / 381 mm |
| Resonance | 35 Hz |
| Q factor | 0.29 |
| Sensitivity | 95.8 dB |
| Linear excursion | ± 6 mm |
| Program Power | 1200 W |
.jpg)
Specifications
- Sensitivity (1W, 1m, infinite baffle) SPL1W 95.8dB
- Frequency response 35 - 2000Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 35Hz
- Mechanical quality factor QMS 6.54
- Electrical quality factor QES 0.30
- Total quality factor QTS 0.29
Large signal parameters
- Maximum linear excursion (one way) xmax 6mm
- Maximum excursion before damage xlim 12mm
- Air volume displaced at xmax VD 516cm³
- Power handling P 600W
- Program power Pmax 1200W
Voice Coil
- Nominal impedance Z 8Ω
- DC resistance RE 6.1Ω
- Inductance (1kHz, estimated) LE 3mH
- VC Diameter 102mm
- Winding height HVC 16mm
- Winding material Copper
- Former material Glass Fibre Reinforced Polymer
Magnet
- Force factor Bl 21.7N/A
- Motor constant Bl/√RE 8.79N/√W
- Air gap height HAG 8mm
- Material Ferrite
Diaphragm
- Effective diameter 331mm
- Effective area SD 860cm²
- Moving mass MMS 105g
- Moving mass (without air load) MMD 87.8g
Suspensions
- Stiffness KMS 5.18N/mm
- Compliance CMS 193µm/N
- Equivalent volume to the compliance VAS 203L
- Mechanical resistance RMS 3.53N·s/m
- Surround material Polycotton
- Spider material Polycotton
Dimensions
- Nominal diameter 15″
- 381mm
- Baffle cutout diameter 359mm
- Volume occupied by the driver (estimated) 4.3L
- Frame material Injected Aluminum
.png)
.png)
.png)
Export this driver to a simulation software:
Closed Box Simulator·
Speakerbench
WinISD
Basta!
Hornresp
QSpeakers
SpeakerSim
MfbLabs
Amplion.jpg.webp)
.jpg.webp)
.jpg.webp)