Eminence KAPPA-15LFA
8Ω
Low frequency
Nominal diameter | 15″ / 381 mm |
Resonance | 39 Hz |
Q factor | 0.38 |
Sensitivity | 94.9 dB |
Linear excursion | ± 5.5 mm |
Program Power | 1200 W |
.jpg)
.jpg)
.jpg)
- Sensitivity (1W, 1m, infinite baffle) SPL1W 94.9dB
- Frequency response 38 - 2700Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 39Hz
- Mechanical quality factor QMS 6.08
- Electrical quality factor QES 0.41
- Total quality factor QTS 0.38
Large signal parameters
- Maximum linear excursion xmax 5.5mm
- Maximum excursion before damage xlim 10.4mm
- Air volume displaced at xmax VD 471cm³
- Power handling P 600W
- Program power Pmax 1200W
Voice Coil
- Nominal impedance Z 8Ω
- DC resistance RE 5.4Ω
- Inductance (1kHz) LE 1.27mH
- VC Diameter 76.2mm
- Winding material Copper
- Former material Polyimide
Magnet
- Force factor Bl 18.6N/A
- Motor constant Bl/√RE 8N/√W
- Air gap height HAG 9.5mm
- Weight 2.693kg
- Material Ferrite
Diaphragm
- Effective diameter 330mm
- Effective area SD 856cm²
- Moving mass MMS 105g
- Moving mass (without air load) MMD 87.7g
- Material Paper
Suspensions
- Stiffness KMS 6.67N/mm
- Compliance CMS 150µm/N
- Equivalent volume to the compliance VAS 159L
- Mechanical resistance RMS 4.23N·s/m
- Surround material Cloth
Dimensions
- Nominal diameter 15″
- 381mm
- Overall diameter 385mm
- Baffle cutout diameter 352mm
- Overall depth 162mm
- Volume occupied by the driver 4.11L
- Net weight 9.072kg
- Frame material Pressed Steel
.png)
Export this driver to a simulation software:
Closed Box Simulator·





