FaitalPRO 12FH500 4Ω

Subwoofer

Nominal diameter12″ / 300 mm
Resonance45 Hz
Q factor0.22
Sensitivity96.2 dB
Linear excursion± 7.3 mm
Program Power1000 W
Ω°0102030405060101001 00010 000-180-120-60060120180Electrical ImpedanceElectrical Phase
mm05101520101001 00010 000Diaphragm ExcursionMaximum Linear Excursion
m/s0246810101001 00010 000Diaphragm Velocity
dB60708090100110120101001 00010 000SPL (1W, 1m, on axis)Maximum SPL
°-180-120-60060120180101001 00010 000Acoustical phase (1m, on axis)
ms051015202530101001 00010 000Group Delay (1m, on axis)
00.51-205101520Step response
-1-0.500.51-2010203040Response to a tone burst of Hz with cycles
Driver
Port
Combined
Frequency response
Hz
Impedance
Ω
Impedance Phase
°
Excursion
mm
Velocity
m/s
SPL
dB
Acoustical Phase
°
Group Delay
ms
Transient response
ms
Discard
Apply
  • Sensitivity (1W, 1m, infinite baffle) SPL1W 96.2dB
  • Frequency response 45 - 4000Hz

Thiele & Small parameters

  • Resonance frequency (free air) fS 45Hz
  • Mechanical quality factor QMS 9.09
  • Electrical quality factor QES 0.23
  • Total quality factor QTS 0.22

Large signal parameters

  • Maximum linear excursion xmax 7.3mm
  • Maximum excursion before damage xlim 16mm
  • Air volume displaced at xmax VD 384cm³
  • Power handling P 500W
  • Program power Pmax 1000W

Voice Coil

  • Nominal impedance Z 4Ω
  • DC resistance RE 3.3Ω
  • Inductance (1kHz) LE 0.63mH
  • VC Diameter 77mm
  • Winding height HVC 18mm
  • Winding material Aluminium
  • Former material Glass Fiber

Magnet

  • Flux density B 1.2T
  • Force factor Bl 15.5N/A
  • Motor constant Bl/√RE 8.53N/√W
  • Air gap height HAG 10.5mm
  • Material Neodymium Slug

Diaphragm

  • Effective diameter 260mm
  • Effective area SD 529cm²
  • Moving mass MMS 60.9g
  • Moving mass (without air load) MMD 52.2g

Suspensions

  • Stiffness KMS 4.76N/mm
  • Compliance CMS 210µm/N
  • Equivalent volume to the compliance VAS 80.3L
  • Mechanical resistance RMS 1.9N·s/m

Dimensions

  • Nominal diameter 12
  • 300mm
  • Overall diameter 316mm
  • Baffle cutout diameter 284mm
  • Overall depth 156mm
  • Flange thickness 12mm
  • Mounting depth 144mm
  • Volume occupied by the driver 2.3L
  • Net weight 3.9kg
  • Frame material Aluminium
FaitalPRO 12FH500 4Ω Impedance
FaitalPRO 12FH500 4Ω SPL
FaitalPRO 12FH500 4Ω Dimensions

Similar subwoofers to FaitalPRO 12FH500 4Ω

FaitalPRO 12FH510 8Ω Subwoofer

FaitalPRO 12FH510 8Ω

8 Ω
12 Subwoofer
fS45 Hz
SD533 cm²
45 - 3150 Hz
QTS0.24
xmax7.5 mm
SPL1W96.1 dB
Bl/√RE8.37
Pmax1000 W
Oberton 12B401 Subwoofer

Oberton 12B401

8 Ω
12 Subwoofer
fS46.6 Hz
SD515 cm²
50 - 2500 Hz
QTS0.25
xmax6.8 mm
SPL1W95.8 dB
Bl/√RE8.52
Pmax800 W