Nominal diameter | 12″ / 300 mm |
Resonance | 30 Hz |
Q factor | 0.35 |
Sensitivity | 91.5 dB |
Linear excursion | ± 13.6 mm |
Program Power | 800 W |
Driver
Port
Combined
Frequency response
Hz
Impedance
Ω
Impedance Phase
°
Excursion
mm
Velocity
m/s
SPL
dB
Acoustical Phase
°
Group Delay
ms
Transient response
ms
- Sensitivity (1W, 1m, infinite baffle) SPL1W 91.5dB
- Frequency response 30 - 2500Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 30Hz
- Mechanical quality factor QMS 10.00
- Electrical quality factor QES 0.36
- Total quality factor QTS 0.35
Large signal parameters
- Maximum linear excursion xmax 13.6mm
- Maximum excursion before damage xlim 21.5mm
- Air volume displaced at xmax VD 749cm³
- Power handling P 400W
- Program power Pmax 800W
Voice Coil
- Nominal impedance Z 8Ω
- DC resistance RE 6.8Ω
- Inductance (1kHz) LE 0.78mH
- VC Diameter 65mm
- Winding height HVC 29.8mm
- Winding material Aluminium
- Former material Glass Fiber
Magnet
- Flux density B 1.5T
- Force factor Bl 18N/A
- Motor constant Bl/√RE 6.9N/√W
- Air gap height HAG 8mm
- Material Ferrite Ring
Diaphragm
- Effective diameter 265mm
- Effective area SD 552cm²
- Moving mass MMS 91.3g
- Moving mass (without air load) MMD 82.1g
Suspensions
- Stiffness KMS 3.23N/mm
- Compliance CMS 310µm/N
- Equivalent volume to the compliance VAS 131L
- Mechanical resistance RMS 1.7N·s/m
Dimensions
- Nominal diameter 12″
- 300mm
- Overall diameter 316mm
- Baffle cutout diameter 282mm
- Overall depth 157mm
- Flange thickness 20mm
- Mounting depth 137mm
- Volume occupied by the driver 2.85L
- Net weight 7.0kg
- Frame material Aluminium
Similar subwoofers to FaitalPRO 12RS430 8Ω
ETON 12-612C8/62RP8 Ω |
---|
12″ Woofer |
fS | 28 Hz |
SD | 515 cm² |
28 - 500 Hz |
QTS | 0.32 |
xmax | 8.5 mm |
SPL1W | 91.4 dB |
Bl/√RE | 6.31 |
Pmax | 300 W |