FaitalPRO 8FE200 8Ω
4Ω
8Ω
Woofer
Nominal diameter | 8″ / 200 mm |
Resonance | 80 Hz |
Q factor | 0.63 |
Sensitivity | 92.5 dB |
Linear excursion | ± 4.7 mm |
Program Power | 260 W |
.jpg)
- Sensitivity (1W, 1m, infinite baffle) SPL1W 92.5dB
- Frequency response 60 - 5000Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 80Hz
- Mechanical quality factor QMS 13.00
- Electrical quality factor QES 0.66
- Total quality factor QTS 0.63
Large signal parameters
- Maximum linear excursion xmax 4.7mm
- Maximum excursion before damage xlim 10.4mm
- Air volume displaced at xmax VD 98cm³
- Power handling P 130W
- Program power Pmax 260W
Voice Coil
- Nominal impedance Z 8Ω
- DC resistance RE 5.9Ω
- Inductance (1kHz) LE 0.44mH
- VC Diameter 37mm
- Winding height HVC 12mm
- Winding material Aluminium
- Former material Kapton
Magnet
- Flux density B 1T
- Force factor Bl 8.2N/A
- Motor constant Bl/√RE 3.38N/√W
- Air gap height HAG 8mm
- Material Ferrite Ring
Diaphragm
- Effective diameter 163mm
- Effective area SD 209cm²
- Moving mass MMS 15g
- Moving mass (without air load) MMD 12.7g
Suspensions
- Stiffness KMS 3.85N/mm
- Compliance CMS 260µm/N
- Equivalent volume to the compliance VAS 16.1L
- Mechanical resistance RMS 0.6N·s/m
Dimensions
- Nominal diameter 8″
- 200mm
- Overall diameter 209mm
- Baffle cutout diameter 178mm
- Overall depth 89mm
- Flange thickness 8mm
- Mounting depth 81mm
- Volume occupied by the driver 0.6L
- Net weight 2.2kg
- Frame material Steel
.png)
.png)
.png)
Export this driver to a simulation software:
Closed Box Simulator·





