Focal K2 POWER ES 165 K2E
2Ω
2 way kit
Nominal diameter | 6.5″ / 165 mm |
Resonance | 67 Hz |
Q factor | 0.55 |
Sensitivity | 89 dB |
Linear excursion | ± 4.8 mm |
Program Power | 200 W |
.jpg)
.jpg)
.jpg)
- Sensitivity (1W, 1m, infinite baffle) SPL1W 89dB
- Frequency response 60 - 22000Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 67Hz
- Mechanical quality factor QMS 7.00
- Electrical quality factor QES 0.60
- Total quality factor QTS 0.55
Large signal parameters
- Maximum linear excursion xmax 4.8mm
- Air volume displaced at xmax VD 62cm³
- Power handling P 100W
- Program power Pmax 200W
Voice Coil
- Nominal impedance Z 2Ω
- DC resistance RE 1.8Ω
- Inductance (1kHz, estimated) LE 0.22mH
- VC Diameter 32mm
- Winding material Copper Clad Aluminium
- Former material Kapton
Magnet
- Force factor Bl 4.2N/A
- Motor constant Bl/√RE 3.13N/√W
- Diameter 95mm
- Height 20mm
Diaphragm
- Effective diameter 128mm
- Effective area SD 129cm²
- Moving mass MMS 13g
- Moving mass (without air load) MMD 11.9g
- Material K2 Sandwich
Suspensions
- Stiffness KMS 2.44N/mm
- Compliance CMS 410µm/N
- Equivalent volume to the compliance VAS 10L
- Mechanical resistance RMS 0.78N·s/m
- Surround material Butyl
Dimensions
- Nominal diameter 6.5″
- 165mm
- Overall diameter 165mm
- Baffle cutout diameter 142mm
- Mounting depth 79mm
- Volume occupied by the driver (estimated) 0.59L
- Net weight 1.45kg
.png)
.png)
Export this driver to a simulation software:
Closed Box Simulator·





