Jensen Mod 10-50

• Sensitivity (1W, 1m, infinite baffle) SPL1W 97.4dB

Thiele & Small parameters

• Resonance frequency (free air) fS 111Hz
• Mechanical quality factor QMS 16.22
• Electrical quality factor QES 2.91
• Total quality factor QTS 2.47

Large signal parameters

• Maximum linear excursion xmax 2mm
• Air volume displaced at xmax VD 66cm³
• Power handling P 50W
• Program power Pmax 100W

Voice Coil

• Nominal impedance Z 32Ω
• DC resistance RE 24.5Ω
• Inductance (1kHz) LE 1.6mH
• VC Diameter 32mm
• Winding material Copper
• Former material Epotex

Magnet

• Flux density B 1.1T
• Force factor Bl 11.2N/A
• Motor constant Bl/√RE 2.26N/√W
• Weight 0.426kg
• Material Ferrite

Diaphragm

• Effective diameter 205mm
• Effective area SD 330cm²
• Moving mass MMS 20.6g
• Moving mass (without air load) MMD 16.2g
• Material Paper

Suspensions

• Stiffness KMS 10.6N/mm
• Compliance CMS 94µm/N
• Equivalent volume to the compliance VAS 14.4L
• Mechanical resistance RMS 0.88N·s/m
• Surround material Integrated Paper

Dimensions

• Nominal diameter 10″
• 259mm
• Overall diameter 259mm
• Volume occupied by the driver (estimated) 0.68L
• Net weight 1.68kg
• Frame material Pressed Sheet