Morel Integra INTEGRA 524
4Ω
Coaxial
Nominal diameter | 5.5″ / 143 mm |
Resonance | 62 Hz |
Q factor | 0.29 |
Sensitivity | 90.6 dB |
Linear excursion | ± 3 mm |
Program Power | 160 W |
.png)
.png)
- Sensitivity (1W, 1m, infinite baffle) SPL1W 90.6dB
Thiele & Small parameters
- Resonance frequency (free air) fS 62Hz
- Mechanical quality factor QMS 1.65
- Electrical quality factor QES 0.36
- Total quality factor QTS 0.29
Large signal parameters
- Maximum linear excursion xmax 3mm
- Air volume displaced at xmax VD 29cm³
- Power handling P 80W
- Program power Pmax 160W
Voice Coil
- Nominal impedance Z 4Ω
- DC resistance RE 3.6Ω
- Inductance (1kHz) LE 0.49mH
- VC Diameter 54mm
- Winding height HVC 10mm
- Winding material T: Copper W: Hexatech™ Aluminum
- Former material Aluminum
Magnet
- Flux density B 0.85T
- Force factor Bl 5.05N/A
- Motor constant Bl/√RE 2.65N/√W
- Air gap height HAG 4mm
- Material Hybrid™ Neodymium/Ferrite
Diaphragm
- Effective diameter 111mm
- Effective area SD 97cm²
- Moving mass MMS 6.59g
- Moving mass (without air load) MMD 5.9g
- Material T: soft dome w: composite paper
Suspensions
- Stiffness KMS 1.02N/mm
- Compliance CMS 980µm/N
- Equivalent volume to the compliance VAS 12.9L
- Mechanical resistance RMS 1.55N·s/m
Dimensions
- Nominal diameter 5.5″
- 143mm
- Overall diameter 143mm
- Baffle cutout diameter 140mm
- Overall depth 66mm
- Flange thickness 6mm
- Mounting depth 63mm
- Volume occupied by the driver (estimated) 0.2L
- Net weight 0.49kg
.png)
.png)
Export this driver to a simulation software:
Closed Box Simulator·





