Morel TEMPO U MW 5
4Ω
2 Way Kit
| Nominal diameter | 5″ / 135 mm |
| Resonance | 65 Hz |
| Q factor | 0.50 |
| Sensitivity | 88 dB |
| Linear excursion | ± 3 mm |
| Program Power | 200 W |
.jpg)
Specifications
- Sensitivity (1W, 1m, infinite baffle) SPL1W 88dB
- Frequency response 65 - 22000Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 65Hz
- Mechanical quality factor QMS 6.53
- Electrical quality factor QES 0.54
- Total quality factor QTS 0.50
Large signal parameters
- Maximum linear excursion xmax 3mm
- Air volume displaced at xmax VD 31cm³
- Power handling P 100W
- Program power Pmax 200W
Voice Coil
- Nominal impedance Z 4Ω
- DC resistance RE 3.0Ω
- Inductance (1kHz) LE 0.32mH
- VC Diameter 38mm
- Winding height HVC 10mm
- Winding material Copper
- Former material Kapton
Magnet
- Flux density B 0.76T
- Force factor Bl 4.7N/A
- Motor constant Bl/√RE 2.71N/√W
- Air gap height HAG 4mm
- Material High grade ferrite
Diaphragm
- Effective diameter 115mm
- Effective area SD 103cm²
- Moving mass MMS 10.1g
- Moving mass (without air load) MMD 9.4g
- Material Composite cellular fiber
Suspensions
- Stiffness KMS 1.7N/mm
- Compliance CMS 590µm/N
- Equivalent volume to the compliance VAS 5.72L
- Mechanical resistance RMS 0.63N·s/m
Dimensions
- Nominal diameter 5″
- 135mm
- Overall diameter 135mm
- Baffle cutout diameter 112mm
- Mounting depth 57mm
- Volume occupied by the driver (estimated) 0.39L
- Net weight 0.98kg
Export this driver to a simulation software:
Closed Box Simulator·
Speakerbench
WinISD
Basta!
Hornresp
QSpeakers
SpeakerSim
MfbLabs.jpg.webp)
.jpg.webp)
.png.webp)