Morel TEMPO U MW 6
4Ω
2 Way Kit
| Nominal diameter | 6″ / 165 mm |
| Resonance | 50 Hz |
| Q factor | 0.63 |
| Sensitivity | 86.3 dB |
| Linear excursion | ± 3 mm |
| Program Power | 240 W |
.jpg)
Specifications
- Sensitivity (1W, 1m, infinite baffle) SPL1W 86.3dB
- Frequency response 55 - 22000Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 50Hz
- Mechanical quality factor QMS 6.50
- Electrical quality factor QES 0.70
- Total quality factor QTS 0.63
Large signal parameters
- Maximum linear excursion xmax 3mm
- Air volume displaced at xmax VD 39cm³
- Power handling P 120W
- Program power Pmax 240W
Voice Coil
- Nominal impedance Z 4Ω
- DC resistance RE 3.0Ω
- Inductance (1kHz) LE 0.32mH
- VC Diameter 38mm
- Winding height HVC 10mm
- Winding material Copper
- Former material Kapton
Magnet
- Flux density B 0.76T
- Force factor Bl 4.7N/A
- Motor constant Bl/√RE 2.71N/√W
- Air gap height HAG 4mm
- Material High grade ferrite
Diaphragm
- Effective diameter 129mm
- Effective area SD 130cm²
- Moving mass MMS 15.9g
- Moving mass (without air load) MMD 14.8g
- Material Composite cellular fiber
Suspensions
- Stiffness KMS 1.54N/mm
- Compliance CMS 650µm/N
- Equivalent volume to the compliance VAS 16.2L
- Mechanical resistance RMS 0.5N·s/m
Dimensions
- Nominal diameter 6″
- 165mm
- Overall diameter 165mm
- Baffle cutout diameter 141mm
- Mounting depth 64mm
- Volume occupied by the driver (estimated) 0.44L
- Net weight 1.1kg
Export this driver to a simulation software:
Closed Box Simulator·
Speakerbench
WinISD
Basta!
Hornresp
QSpeakers
SpeakerSim
MfbLabs.jpg.webp)
.jpg.webp)
.jpg.webp)