Oberton 12NCX
8Ω
Coaxial
Nominal diameter | 12″ / 315 mm |
Resonance | 58.2 Hz |
Q factor | 0.30 |
Sensitivity | 98 dB |
Linear excursion | ± 5.3 mm |
Program Power | 700 W |
.jpg)
- Sensitivity (1W, 1m, infinite baffle) SPL1W 98dB
- Frequency response 60 - 16000Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 58.2Hz
- Mechanical quality factor QMS 6.18
- Electrical quality factor QES 0.31
- Total quality factor QTS 0.30
Large signal parameters
- Maximum linear excursion xmax 5.3mm
- Air volume displaced at xmax VD 270cm³
- Power handling P 350W
- Program power Pmax 700W
Voice Coil
- Nominal impedance Z 8Ω
- DC resistance RE 5.7Ω
- Inductance (1kHz) LE 0.58mH
- VC Diameter 77mm
- Winding height HVC 15mm
- Winding material Aluminium
- Former material Kapton
Magnet
- Flux density B 1.1T
- Force factor Bl 17.2N/A
- Motor constant Bl/√RE 7.2N/√W
- Air gap height HAG 9mm
- Material Neodymium
Diaphragm
- Effective diameter 256mm
- Effective area SD 515cm²
- Moving mass MMS 43.9g
- Moving mass (without air load) MMD 35.5g
- Material Paper with glassfiber
Suspensions
- Stiffness KMS 5.88N/mm
- Compliance CMS 170µm/N
- Equivalent volume to the compliance VAS 62.9L
- Mechanical resistance RMS 2.6N·s/m
Dimensions
- Nominal diameter 12″
- 315mm
- Overall diameter 315mm
- Baffle cutout diameter 280mm
- Overall depth 191mm
- Volume occupied by the driver (estimated) 3L
- Net weight 5.4kg
- Frame material Die Cast Aluminium
.png)
.png)
Export this driver to a simulation software:
Closed Box Simulator·





