P.Audio BT10-500A
8Ω
Low frequency
Nominal diameter | 10″ / 254 mm |
Resonance | 60 Hz |
Q factor | 0.55 |
Sensitivity | 92.5 dB |
Linear excursion | ± 4.1 mm |
Program Power | 400 W |
.jpg)
.jpg)
.jpg)
- Sensitivity (1W, 1m, infinite baffle) SPL1W 92.5dB
- Frequency response 60 - 3000Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 60Hz
- Mechanical quality factor QMS 9.78
- Electrical quality factor QES 0.59
- Total quality factor QTS 0.55
Large signal parameters
- Maximum linear excursion xmax 4.1mm
- Air volume displaced at xmax VD 149cm³
- Power handling P 200W
- Program power Pmax 400W
Voice Coil
- Nominal impedance Z 8Ω
- DC resistance RE 5.7Ω
- Inductance (1kHz) LE 0.49mH
- VC Diameter 63.7mm
- Winding height HVC 16.2mm
- Winding material CCA-W
- Former material Kapton
Magnet
- Flux density B 1.1T
- Force factor Bl 11.7N/A
- Motor constant Bl/√RE 4.9N/√W
- Air gap height HAG 8mm
- Material Ferrite
Diaphragm
- Effective diameter 213mm
- Effective area SD 363cm²
- Moving mass MMS 38.3g
- Moving mass (without air load) MMD 33.3g
- Material Waterproof Paper
Suspensions
- Stiffness KMS 5.5N/mm
- Compliance CMS 182µm/N
- Equivalent volume to the compliance VAS 34.1L
- Mechanical resistance RMS 1.48N·s/m
- Surround material Cloth
- Spider material Cotton (Single)
Dimensions
- Nominal diameter 10″
- 254mm
- Overall diameter 265mm
- Baffle cutout diameter 237mm
- Overall depth 120mm
- Flange thickness 14mm
- Mounting depth 106mm
- Volume occupied by the driver (estimated) 1.9L
- Net weight 5.0kg
- Frame material Aluminium
.png)
.png)
Export this driver to a simulation software:
Closed Box Simulator·





