PHL audio 3481-14
8Ω
Coaxial
| Nominal diameter | 10″ / 250 mm |
| Resonance | 55 Hz |
| Q factor | 0.26 |
| Sensitivity | 93.4 dB |
| Linear excursion | ± 6 mm |
| Program Power | 500 W |
.jpg)
Specifications
- Sensitivity (1W, 1m, infinite baffle) SPL1W 93.4dB
- Frequency response 40 - 3000Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 55Hz
- Mechanical quality factor QMS 6.56
- Electrical quality factor QES 0.27
- Total quality factor QTS 0.26
Large signal parameters
- Maximum linear excursion xmax 6mm
- Maximum excursion before damage xlim 12mm
- Air volume displaced at xmax VD 194cm³
- Power handling P 250W
- Program power Pmax 500W
Voice Coil
- Nominal impedance Z 8Ω
- DC resistance RE 5.2Ω
- Inductance (1kHz) LE 0.722mH
- VC Diameter 64mm
- Winding height HVC 17mm
Magnet
- Force factor Bl 18.1N/A
- Motor constant Bl/√RE 7.94N/√W
- Air gap height HAG 8mm
- Diameter 172mm
- Material Ferrite
Diaphragm
- Effective diameter 203mm
- Effective area SD 324cm²
- Moving mass MMS 49.5g
- Moving mass (without air load) MMD 45.2g
Suspensions
- Stiffness KMS 5.88N/mm
- Compliance CMS 170µm/N
- Equivalent volume to the compliance VAS 25.2L
- Mechanical resistance RMS 2.61N·s/m
Dimensions
- Nominal diameter 10″
- 250mm
- Overall diameter 255mm
- Baffle cutout diameter 229mm
- Overall depth 120mm
- Flange thickness 11mm
- Mounting depth 109mm
- Volume occupied by the driver 1.5L
- Net weight 5.9kg
.png)
Export this driver to a simulation software:
Closed Box Simulator·
Speakerbench
WinISD
Basta!
Hornresp
QSpeakers
SpeakerSim
MfbLabs.png.webp)
.jpg.webp)
.jpg.webp)