PHL audio 982

• Sensitivity (1W, 1m, infinite baffle) SPL1W 91.5dB
• Frequency response 110 - 16000Hz

Thiele & Small parameters

• Resonance frequency (free air) fS 130Hz
• Mechanical quality factor QMS 3.65
• Electrical quality factor QES 0.52
• Total quality factor QTS 0.46

Large signal parameters

• Maximum linear excursion xmax 4.5mm
• Maximum excursion before damage xlim 9mm
• Air volume displaced at xmax VD 43cm³
• Power handling P 100W
• Program power Pmax 200W

Voice Coil

• Nominal impedance Z 8Ω
• DC resistance RE 5.7Ω
• Inductance (1kHz) LE 0.619mH
• VC Diameter 38mm
• Winding height HVC 12mm

Magnet

• Force factor Bl 8.7N/A
• Motor constant Bl/√RE 3.64N/√W
• Air gap height HAG 6mm
• Diameter 118mm
• Material Ferrite

Diaphragm

• Effective diameter 111mm
• Effective area SD 96cm²
• Moving mass MMS 8.5g
• Moving mass (without air load) MMD 7.8g

Suspensions

• Stiffness KMS 5.56N/mm
• Compliance CMS 180µm/N
• Equivalent volume to the compliance VAS 2.3L
• Mechanical resistance RMS 1.9N·s/m

Dimensions

• Nominal diameter 5″
• 130mm
• Overall diameter 136mm
• Baffle cutout diameter 125mm
• Overall depth 87mm
• Flange thickness 12mm
• Mounting depth 75mm
• Volume occupied by the driver 0.38L
• Net weight 2.1kg