PRV Audio 12MB1003FT
8Ω
Mid Bass
Nominal diameter | 12″ / 308 mm |
Resonance | 51.4 Hz |
Q factor | 0.36 |
Sensitivity | 96.2 dB |
Linear excursion | ± 6.1 mm |
Program Power | 1000 W |
Discontinued
.jpg)
.jpg)
.jpg)
- Sensitivity (1W, 1m, infinite baffle) SPL1W 96.2dB
- Frequency response 55 - 5000Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 51.4Hz
- Mechanical quality factor QMS 6.98
- Electrical quality factor QES 0.37
- Total quality factor QTS 0.36
Large signal parameters
- Maximum linear excursion xmax 6.1mm
- Air volume displaced at xmax VD 372cm³
- Power handling P 500W
- Program power Pmax 1000W
Voice Coil
- Nominal impedance Z 8Ω
- DC resistance RE 4.5Ω
- Inductance (1kHz) LE 1.02mH
- VC Diameter 76.2mm
- Winding height HVC 17mm
- Winding material Copper Clad Aluminium www.prvaudio.com
- Former material Kapton
Magnet
- Force factor Bl 14.2N/A
- Motor constant Bl/√RE 6.71N/√W
- Air gap height HAG 9.5mm
- Material Ferrite
Diaphragm
- Effective diameter 278mm
- Effective area SD 607cm²
- Moving mass MMS 52.4g
- Moving mass (without air load) MMD 42.6g
Suspensions
- Stiffness KMS 5.5N/mm
- Compliance CMS 182µm/N
- Equivalent volume to the compliance VAS 93.9L
- Mechanical resistance RMS 2.43N·s/m
Dimensions
- Nominal diameter 12″
- 308mm
- Overall diameter 308mm
- Baffle cutout diameter 284mm
- Overall depth 148mm
- Flange thickness 13mm
- Mounting depth 135mm
- Volume occupied by the driver (estimated) 3L
- Net weight 7.12kg
- Frame material Die Cast Aluminum
.png)
.png)
Export this driver to a simulation software:
Closed Box Simulator·





