Pride M12.10 D2
1Ω
2x2Ω
Subwoofer
| Nominal diameter | 10″ / 275 mm |
| Resonance | 33.1 Hz |
| Q factor | 0.48 |
| Sensitivity | 82.3 dB |
| Linear excursion | ± 19 mm |
| Program Power | 2400 W |
.jpg)
.jpg)
.jpg)
Specifications
- Sensitivity (1W, 1m, infinite baffle) SPL1W 82.3dB
Thiele & Small parameters
- Resonance frequency (free air) fS 33.1Hz
- Mechanical quality factor QMS 5.20
- Electrical quality factor QES 0.53
- Total quality factor QTS 0.48
Large signal parameters
- Maximum linear excursion xmax 19mm
- Air volume displaced at xmax VD 640cm³
- Power handling P 1200W
- Program power Pmax 2400W
Voice Coil
- Nominal impedance Z 2 x 2Ω
- DC resistance (in series) RE 3.7Ω
- Inductance (1kHz, in series, estimated) LE 3.13mH
- VC Diameter 71.1mm
- Winding material round copper
Magnet
- Force factor (in series) Bl 18.6N/A
- Motor constant Bl/√RE 9.67N/√W
- Diameter 170mm
- Height 52mm
Diaphragm
- Effective diameter 207mm
- Effective area SD 337cm²
- Moving mass MMS 238g
- Moving mass (without air load) MMD 233g
- Material Paper with glass fiber
Suspensions
- Stiffness KMS 9.8N/mm
- Compliance CMS 102µm/N
- Equivalent volume to the compliance VAS 16.5L
- Mechanical resistance RMS 9.52N·s/m
Dimensions
- Nominal diameter 10″
- 275mm
- Overall diameter 275mm
- Baffle cutout diameter 242mm
- Mounting depth 157mm
- Volume occupied by the driver 2L
- Net weight 10.0kg
- Frame material Steel
.jpg)
Export this driver to a simulation software:
Closed Box Simulator·
Speakerbench
WinISD
Basta!
Hornresp
QSpeakers
SpeakerSim
MfbLabs.jpg.webp)
.jpg.webp)
.jpg.webp)