Pride M12.12 D2
1Ω
2x2Ω
Subwoofer
| Nominal diameter | 12″ / 316 mm |
| Resonance | 33.5 Hz |
| Q factor | 0.50 |
| Sensitivity | 84.2 dB |
| Linear excursion | ± 19 mm |
| Program Power | 2400 W |
.jpg)
.jpg)
.jpg)
Specifications
- Sensitivity (1W, 1m, infinite baffle) SPL1W 84.2dB
Thiele & Small parameters
- Resonance frequency (free air) fS 33.5Hz
- Mechanical quality factor QMS 5.10
- Electrical quality factor QES 0.56
- Total quality factor QTS 0.50
Large signal parameters
- Maximum linear excursion xmax 19mm
- Air volume displaced at xmax VD 884cm³
- Power handling P 1200W
- Program power Pmax 2400W
Voice Coil
- Nominal impedance Z 2 x 2Ω
- DC resistance (in series) RE 3.3Ω
- Inductance (1kHz, in series, estimated) LE 3.1mH
- VC Diameter 71.1mm
- Winding material round copper
Magnet
- Force factor (in series) Bl 18.6N/A
- Motor constant Bl/√RE 10.2N/√W
- Diameter 170mm
- Height 52mm
Diaphragm
- Effective diameter 243mm
- Effective area SD 465cm²
- Moving mass MMS 278g
- Moving mass (without air load) MMD 270g
- Material Paper with glass fiber
Suspensions
- Stiffness KMS 11.1N/mm
- Compliance CMS 90µm/N
- Equivalent volume to the compliance VAS 27.5L
- Mechanical resistance RMS 11.5N·s/m
Dimensions
- Nominal diameter 12″
- 316mm
- Overall diameter 316mm
- Baffle cutout diameter 280mm
- Mounting depth 161mm
- Volume occupied by the driver 2.5L
- Net weight 10.3kg
- Frame material Steel
.jpg)
Export this driver to a simulation software:
Closed Box Simulator·
Speakerbench
WinISD
Basta!
Hornresp
QSpeakers
SpeakerSim
MfbLabs.jpg.webp)
.png.webp)
.jpg.webp)