Pride M9.15 S1
1Ω
2x2ΩSubwoofer
| Nominal diameter | 15″ / 390 mm |
| Resonance | 31.2 Hz |
| Q factor | 0.66 |
| Sensitivity | 86.9 dB |
| Linear excursion | ± 17 mm |
| Program Power | 1800 W |
.jpg)
.jpg)
.jpg)
Specifications
- Sensitivity (1W, 1m, infinite baffle) SPL1W 86.9dB
Thiele & Small parameters
- Resonance frequency (free air) fS 31.2Hz
- Mechanical quality factor QMS 5.50
- Electrical quality factor QES 0.75
- Total quality factor QTS 0.66
Large signal parameters
- Maximum linear excursion xmax 17mm
- Air volume displaced at xmax VD 1316cm³
- Power handling P 900W
- Program power Pmax 1800W
Voice Coil
- Nominal impedance Z 1Ω
- DC resistance RE 0.3Ω
- Inductance (1kHz, estimated) LE 0.31mH
- VC Diameter 63.5mm
- Winding material round copper
Magnet
- Force factor Bl 5.2N/A
- Motor constant Bl/√RE 9.49N/√W
- Diameter 156mm
- Height 48mm
Diaphragm
- Effective diameter 314mm
- Effective area SD 774cm²
- Moving mass MMS 320g
- Moving mass (without air load) MMD 304g
- Material Paper with glass fiber
Suspensions
- Stiffness KMS 12.3N/mm
- Compliance CMS 81µm/N
- Equivalent volume to the compliance VAS 68.7L
- Mechanical resistance RMS 11.4N·s/m
Dimensions
- Nominal diameter 15″
- 390mm
- Overall diameter 390mm
- Baffle cutout diameter 352mm
- Mounting depth 179mm
- Volume occupied by the driver 3.5L
- Net weight 8.0kg
- Frame material Steel
.jpg)
Export this driver to a simulation software:
Closed Box Simulator·
Speakerbench
WinISD
Basta!
Hornresp
QSpeakers
SpeakerSim
MfbLabs.jpg.webp)
.jpg.webp)
.jpg.webp)