Nominal diameter | 6.5″ / 165 mm |
Resonance | 40 Hz |
Q factor | 0.42 |
Sensitivity | 87.5 dB |
Linear excursion | ± 3 mm |
Program Power | 120 W |
Driver
Port
Combined
Frequency response
Hz
Impedance
Ω
Impedance Phase
°
Excursion
mm
Velocity
m/s
SPL
dB
Acoustical Phase
°
Group Delay
ms
Transient response
ms
- Sensitivity (1W, 1m, infinite baffle) SPL1W 87.5dB
- Frequency response 40 - 3000Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 40Hz
- Mechanical quality factor QMS 7.20
- Electrical quality factor QES 0.45
- Total quality factor QTS 0.42
Large signal parameters
- Maximum linear excursion xmax 3mm
- Air volume displaced at xmax VD 39cm³
- Power handling P 60W
- Program power Pmax 120W
Voice Coil
- Nominal impedance Z 4Ω
- DC resistance RE 3.2Ω
- Inductance (1kHz) LE 0.24mH
- VC Diameter 32mm
- Winding height HVC 11mm
Magnet
- Force factor Bl 5N/A
- Motor constant Bl/√RE 2.8N/√W
- Air gap height HAG 5mm
- Weight 0.4kg
Diaphragm
- Effective diameter 129mm
- Effective area SD 131cm²
- Moving mass MMS 14g
- Moving mass (without air load) MMD 12.9g
Suspensions
- Stiffness KMS 0.877N/mm
- Compliance CMS 1140µm/N
- Equivalent volume to the compliance VAS 27.7L
- Mechanical resistance RMS 0.49N·s/m
Dimensions
- Nominal diameter 6.5″
- 165mm
- Volume occupied by the driver (estimated) 0.42L
- Net weight 1.06kg
Similar speaker drivers to Wavecor WF168WA05
Tang Band W6-17214 Ω |
---|
6″ Woofer |
fS | 40 Hz |
SD | 140 cm² |
40 - 5000 Hz |
QTS | 0.43 |
xmax | 8 mm |
SPL1W | 87.8 dB |
Bl/√RE | 2.78 |
Pmax | 100 W |
MONACOR SPH-175HQ8 Ω |
---|
6.75″ Mid-range |
fS | 39 Hz |
SD | 140 cm² |
39 - 4000 Hz |
QTS | 0.42 |
xmax | 5.5 mm |
SPL1W | 87.2 dB |
Bl/√RE | 2.51 |
Pmax | 120 W |
Dayton Audio SIG225-44 Ω |
---|
8″ Woofer |
fS | 40 Hz |
SD | 221 cm² |
39 - 4500 Hz |
QTS | 0.43 |
xmax | 6 mm |
SPL1W | 88 dB |
Bl/√RE | 4.56 |
Pmax | 200 W |