Eighteen Sound 15MB606
Subwoofer
15″ / 380 mm
Nominal diameter
43 Hz
Resonance
0.35
Q factor
97 dB
Sensitivity
± 4.5 mm
Linear excursion
600 W
Program Power
![Eighteen Sound 15MB606 Subwoofer](/18Sound/15MB606/18Sound_15MB606_(Photo_1).jpg)
![Eighteen Sound 15MB606 Subwoofer](/18Sound/15MB606/18Sound_15MB606_(Photo_2).jpg)
![Eighteen Sound 15MB606 Subwoofer](/18Sound/15MB606/18Sound_15MB606_(Photo_3).jpg)
- Sensitivity (1W, 1m, infinite baffle)
- SPL1W
- 97.2
- dB
- Frequency response
- 45 - 4800
- Hz
- Resonance frequency (free air)
- fS
- 43.0
- Hz
- Mechanical quality factor
- QMS
- 6.20
- Electrical quality factor
- QES
- 0.37
- Total quality factor
- QTS
- 0.35
- Maximum linear excursion
- xmax
- 4.5
- mm
- Air volume displaced at xmax
- VD
- 383
- cm³
- Power handling
- P
- 400
- W
- Program power
- Pmax
- 600
- W
- Nominal impedance
- Z
- 8
- Ω
- DC resistance
- RE
- 5.0
- Ω
- Inductance (1kHz)
- LE
- 1.3
- mH
- VC Diameter
- 75
- mm
- Winding material
- Aluminum
- Force factor
- Bl
- 15.1
- N/A
- Motor constant
- Bl/√RE
- 6.75
- N/√W
- Material
- Ferrite
- Effective diameter
- 329
- mm
- Effective area
- SD
- 850
- cm²
- Moving mass
- MMS
- 63
- g
- Moving mass (without air load)
- MMD
- 45.7
- g
- Material
- Weather protected
- Stiffness
- KMS
- 4.61
- N/mm
- Compliance
- CMS
- 217
- µm/N
- Equivalent volume to the compliance
- VAS
- 223
- L
- Mechanical resistance
- RMS
- 2.75
- N·s/m
- Nominal diameter
- 15
- ″
- 380
- mm
- Overall diameter
- 387
- mm
- Baffle cutout diameter
- 353
- mm
- Overall depth
- 171
- mm
- Flange thickness
- 19
- mm
- Mounting depth
- 152
- mm
- Volume occupied by the driver (estimated)
- 3.7
- L
- Net weight
- 6.7
- kg
Thiele & Small parameters
Large signal parameters
Voice Coil
Magnet
Diaphragm
Suspensions
Dimensions
![Eighteen Sound 15MB606 Impedance](/18Sound/15MB606/18Sound_15MB606_(Impedance).png)
![Eighteen Sound 15MB606 SPL](/18Sound/15MB606/18Sound_15MB606_(Frequency_response).png)
![Eighteen Sound 15MB606 Dimensions](/18Sound/15MB606/18Sound_15MB606_(Dimensions).png)
Export this driver to a simulation software:
![WinISD](/images/export/WinISD.png)
![Basta!](/images/export/Basta.png)
![Hornresp](/images/export/Hornresp.png)
![QSpeakers](/images/export/QSpeakers.png)
![SpeakerSim](/images/export/SpeakerSim.png)
![MfbLabs](/images/export/MfbLabs.png)
![Speakerbench](/images/export/Speakerbench.png)