B&C Speaker 10CLA76
8Ω
Woofer
Nominal diameter | 10″ / 250 mm |
Resonance | 71 Hz |
Q factor | 0.29 |
Sensitivity | 94.3 dB |
Linear excursion | ± 6.5 mm |
Program Power | 800 W |
.png)
.png)
.png)
- Sensitivity (1W, 1m, infinite baffle) SPL1W 94.3dB
- Frequency response 70 - 2500Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 71Hz
- Mechanical quality factor QMS 6.72
- Electrical quality factor QES 0.30
- Total quality factor QTS 0.29
Large signal parameters
- Maximum linear excursion xmax 6.5mm
- Air volume displaced at xmax VD 208cm³
- Power handling P 400W
- Program power Pmax 800W
Voice Coil
- Nominal impedance Z 8Ω
- DC resistance RE 5.2Ω
- Inductance (1kHz) LE 1.14mH
- VC Diameter 76mm
- Winding height HVC 18.5mm
- Winding material Aluminium
- Former material Glass Fibre
Magnet
- Flux density B 1.2T
- Force factor Bl 18.6N/A
- Motor constant Bl/√RE 8.13N/√W
- Air gap height HAG 11mm
- Material Neodymium Inside Slug
Diaphragm
- Effective diameter 202mm
- Effective area SD 320cm²
- Moving mass MMS 44.7g
- Moving mass (without air load) MMD 40.4g
- Material Waterproof Both Sides
Suspensions
- Stiffness KMS 8.85N/mm
- Compliance CMS 113µm/N
- Equivalent volume to the compliance VAS 16.4L
- Mechanical resistance RMS 2.97N·s/m
Dimensions
- Nominal diameter 10″
- 250mm
- Overall diameter 258mm
- Baffle cutout diameter 232mm
- Overall depth 122mm
- Flange thickness 10mm
- Mounting depth 112mm
- Volume occupied by the driver 1.6L
- Net weight 3.15kg
.png)
.png)
.png)
Export this driver to a simulation software:
Closed Box Simulator·





