B&C Speaker 10CLX64
8Ω
Coaxial
Nominal diameter | 10″ / 250 mm |
Resonance | 70 Hz |
Q factor | 0.63 |
Sensitivity | 91.9 dB |
Linear excursion | ± 5.5 mm |
Program Power | 500 W |
.jpg)
.jpg)
.jpg)
- Sensitivity (1W, 1m, infinite baffle) SPL1W 91.9dB
- Frequency response 70 - 18000Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 70Hz
- Mechanical quality factor QMS 9.80
- Electrical quality factor QES 0.67
- Total quality factor QTS 0.63
Large signal parameters
- Maximum linear excursion xmax 5.5mm
- Air volume displaced at xmax VD 176cm³
- Power handling P 250W
- Program power Pmax 500W
Voice Coil
- Nominal impedance Z 8Ω
- DC resistance RE 5.6Ω
- Inductance (1kHz) LE 0.91mH
- VC Diameter 64mm
- Winding height HVC 14.5mm
- Winding material Copper
- Former material Glass Fibre
Magnet
- Flux density B 0.9T
- Force factor Bl 11.4N/A
- Motor constant Bl/√RE 4.82N/√W
- Air gap height HAG 8mm
- Material Neodymium Ring
Diaphragm
- Effective diameter 202mm
- Effective area SD 320cm²
- Moving mass MMS 36g
- Moving mass (without air load) MMD 31.7g
- Material Waterproof Front Side
Suspensions
- Stiffness KMS 6.85N/mm
- Compliance CMS 146µm/N
- Equivalent volume to the compliance VAS 21L
- Mechanical resistance RMS 1.62N·s/m
Dimensions
- Nominal diameter 10″
- 250mm
- Overall diameter 258mm
- Baffle cutout diameter 231mm
- Overall depth 141mm
- Flange thickness 9mm
- Mounting depth 132mm
- Volume occupied by the driver (estimated) 1.5L
- Net weight 3.1kg
.png)
.png)
.png)
.png)
Export this driver to a simulation software:
Closed Box Simulator·





