B&C Speaker 10MBX64
8Ω
16Ω
Mid Bass
Nominal diameter | 10″ / 250 mm |
Resonance | 65 Hz |
Q factor | 0.30 |
Sensitivity | 97.4 dB |
Linear excursion | ± 4 mm |
Program Power | 700 W |
.jpg)
.jpg)
.jpg)
- Sensitivity (1W, 1m, infinite baffle) SPL1W 97.4dB
- Frequency response 65 - 6000Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 65Hz
- Mechanical quality factor QMS 5.80
- Electrical quality factor QES 0.32
- Total quality factor QTS 0.30
Large signal parameters
- Maximum linear excursion xmax 4mm
- Air volume displaced at xmax VD 138cm³
- Power handling P 350W
- Program power Pmax 700W
Voice Coil
- Nominal impedance Z 16Ω
- DC resistance RE 10.2Ω
- Inductance (1kHz) LE 0.57mH
- VC Diameter 64mm
- Winding height HVC 12mm
- Winding material Aluminium
- Former material Glass Fibre
Magnet
- Flux density B 1.25T
- Force factor Bl 20.5N/A
- Motor constant Bl/√RE 6.42N/√W
- Air gap height HAG 8mm
- Material Neodymium Inside Slug
Diaphragm
- Effective diameter 210mm
- Effective area SD 346cm²
- Moving mass MMS 30g
- Moving mass (without air load) MMD 25.3g
- Material Waterproof
Suspensions
- Stiffness KMS 5.38N/mm
- Compliance CMS 186µm/N
- Equivalent volume to the compliance VAS 30L
- Mechanical resistance RMS 2.11N·s/m
Dimensions
- Nominal diameter 10″
- 250mm
- Overall diameter 261mm
- Baffle cutout diameter 230mm
- Overall depth 125mm
- Flange thickness 14mm
- Mounting depth 111mm
- Volume occupied by the driver 1.5L
- Net weight 3.25kg
.png)
.png)
.png)
Export this driver to a simulation software:
Closed Box Simulator·





