B&C Speaker 10MD26
8Ω
Mid Bass
Nominal diameter | 10″ / 250 mm |
Resonance | 76 Hz |
Q factor | 0.21 |
Sensitivity | 97.1 dB |
Linear excursion | ± 1.5 mm |
Program Power | 700 W |
.jpg)
.jpg)
.jpg)
- Sensitivity (1W, 1m, infinite baffle) SPL1W 97.1dB
- Frequency response 80 - 4000Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 76Hz
- Mechanical quality factor QMS 4.80
- Electrical quality factor QES 0.22
- Total quality factor QTS 0.21
Large signal parameters
- Maximum linear excursion xmax 1.5mm
- Air volume displaced at xmax VD 48cm³
- Power handling P 350W
- Program power Pmax 700W
Voice Coil
- Nominal impedance Z 8Ω
- DC resistance RE 5.8Ω
- Inductance (1kHz) LE 1.2mH
- VC Diameter 76mm
- Winding height HVC 11mm
- Winding material Aluminium
- Former material Glass Fibre
Magnet
- Flux density B 1.45T
- Force factor Bl 19.6N/A
- Motor constant Bl/√RE 8.14N/√W
- Air gap height HAG 8mm
- Material Ferrite
Diaphragm
- Effective diameter 202mm
- Effective area SD 320cm²
- Moving mass MMS 31g
- Moving mass (without air load) MMD 26.7g
Suspensions
- Stiffness KMS 6.94N/mm
- Compliance CMS 144µm/N
- Equivalent volume to the compliance VAS 20L
- Mechanical resistance RMS 3.08N·s/m
Dimensions
- Nominal diameter 10″
- 250mm
- Overall diameter 262mm
- Baffle cutout diameter 230mm
- Overall depth 124mm
- Flange thickness 14mm
- Mounting depth 110mm
- Volume occupied by the driver 2.6L
- Net weight 7.25kg
.png)
.png)
.png)
Export this driver to a simulation software:
Closed Box Simulator·





