B&C Speaker 12NBX100
4Ω
8ΩWoofer
Nominal diameter | 12″ / 320 mm |
Resonance | 40 Hz |
Q factor | 0.22 |
Sensitivity | 92.8 dB |
Linear excursion | ± 10 mm |
Program Power | 2000 W |
.png)
.jpg)
.png)
- Sensitivity (1W, 1m, infinite baffle) SPL1W 92.8dB
- Frequency response 40 - 1500Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 40Hz
- Mechanical quality factor QMS 7.05
- Electrical quality factor QES 0.23
- Total quality factor QTS 0.22
Large signal parameters
- Maximum linear excursion xmax 10mm
- Air volume displaced at xmax VD 531cm³
- Power handling P 1000W
- Program power Pmax 2000W
Voice Coil
- Nominal impedance Z 4Ω
- DC resistance RE 3.6Ω
- Inductance (1kHz) LE 1.35mH
- VC Diameter 100mm
- Winding height HVC 25mm
- Winding material Copper
- Former material Glass Fibre
Magnet
- Flux density B 1.1T
- Force factor Bl 23N/A
- Motor constant Bl/√RE 12.1N/√W
- Air gap height HAG 11mm
- Material Neodymium Inside Slug
Diaphragm
- Effective diameter 260mm
- Effective area SD 531cm²
- Moving mass MMS 133g
- Moving mass (without air load) MMD 124g
- Material Waterproof Both Sides
Suspensions
- Stiffness KMS 8.55N/mm
- Compliance CMS 117µm/N
- Equivalent volume to the compliance VAS 46.5L
- Mechanical resistance RMS 4.74N·s/m
- Spider material Silicone
Dimensions
- Nominal diameter 12″
- 320mm
- Overall diameter 320mm
- Baffle cutout diameter 280mm
- Overall depth 143mm
- Flange thickness 12mm
- Mounting depth 131mm
- Volume occupied by the driver 4L
- Net weight 8.25kg
.jpg)
.jpg)
.png)
Export this driver to a simulation software:
Closed Box Simulator·





