B&C Speaker 12SW115

• Sensitivity (1W, 1m, infinite baffle) SPL1W 90.5dB
• Frequency response 40 - 1500Hz

Thiele & Small parameters

• Resonance frequency (free air) fS 36Hz
• Mechanical quality factor QMS 11.20
• Electrical quality factor QES 0.29
• Total quality factor QTS 0.28

Large signal parameters

• Maximum linear excursion xmax 13.5mm
• Air volume displaced at xmax VD 705cm³
• Power handling P 1700W
• Program power Pmax 3400W

Voice Coil

• Nominal impedance Z 8Ω
• DC resistance RE 5.2Ω
• Inductance (1kHz) LE 1.95mH
• VC Diameter 115mm
• Winding height HVC 34mm
• Winding material Copper
• Former material Glass Fibre

Magnet

• Flux density B 1.12T
• Force factor Bl 28.8N/A
• Motor constant Bl/√RE 12.6N/√W
• Air gap height HAG 14mm
• Material Neodymium Inside Slug

Diaphragm

• Effective diameter 258mm
• Effective area SD 522cm²
• Moving mass MMS 181g
• Moving mass (without air load) MMD 172g
• Material Waterproof Front Side

Suspensions

• Stiffness KMS 10.4N/mm
• Compliance CMS 96µm/N
• Equivalent volume to the compliance VAS 32L
• Mechanical resistance RMS 3.66N·s/m
• Spider material Silicone

Dimensions

• Nominal diameter 12″
• 320mm
• Overall diameter 315mm
• Baffle cutout diameter 283mm
• Overall depth 167mm
• Flange thickness 12mm
• Mounting depth 155mm
• Volume occupied by the driver 3.4L
• Net weight 10.4kg