B&C Speaker 8FW51
8Ω
Woofer
Nominal diameter | 8″ / 200 mm |
Resonance | 74 Hz |
Q factor | 0.21 |
Sensitivity | 95.2 dB |
Linear excursion | ± 6 mm |
Program Power | 400 W |
.png)
.png)
.png)
- Sensitivity (1W, 1m, infinite baffle) SPL1W 95.2dB
- Frequency response 70 - 5000Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 74Hz
- Mechanical quality factor QMS 9.30
- Electrical quality factor QES 0.21
- Total quality factor QTS 0.21
Large signal parameters
- Maximum linear excursion xmax 6mm
- Air volume displaced at xmax VD 132cm³
- Power handling P 200W
- Program power Pmax 400W
Voice Coil
- Nominal impedance Z 8Ω
- DC resistance RE 5.2Ω
- Inductance (1kHz) LE 0.56mH
- VC Diameter 51mm
- Winding height HVC 17mm
- Winding material Copper
- Former material Kapton
Magnet
- Flux density B 1.35T
- Force factor Bl 17.7N/A
- Motor constant Bl/√RE 7.76N/√W
- Air gap height HAG 10mm
- Material Ferrite
Diaphragm
- Effective diameter 167mm
- Effective area SD 220cm²
- Moving mass MMS 27g
- Moving mass (without air load) MMD 24.5g
- Material Waterproof Both Sides
Suspensions
- Stiffness KMS 5.88N/mm
- Compliance CMS 170µm/N
- Equivalent volume to the compliance VAS 12L
- Mechanical resistance RMS 1.35N·s/m
Dimensions
- Nominal diameter 8″
- 200mm
- Overall diameter 225mm
- Baffle cutout diameter 187mm
- Overall depth 100mm
- Flange thickness 9mm
- Mounting depth 91mm
- Volume occupied by the driver 1.5L
- Net weight 5.6kg
.png)
.png)
.png)
Export this driver to a simulation software:
Closed Box Simulator·





