BMS 12C382
8Ω
Coaxial
Nominal diameter | 12″ / 318 mm |
Resonance | 52 Hz |
Q factor | 0.29 |
Sensitivity | 95.6 dB |
Linear excursion | ± 4.5 mm |
Program Power | 1000 W |
.jpg)
.jpg)
- Sensitivity (1W, 1m, infinite baffle) SPL1W 95.6dB
- Frequency response 45 - 20000Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 52Hz
- Mechanical quality factor QMS 5.60
- Electrical quality factor QES 0.30
- Total quality factor QTS 0.29
Large signal parameters
- Maximum linear excursion xmax 4.5mm
- Air volume displaced at xmax VD 219cm³
- Power handling P 500W
- Program power Pmax 1000W
Voice Coil
- Nominal impedance Z 8Ω
- DC resistance RE 5.8Ω
- Inductance (1kHz) LE 0.9mH
- VC Diameter 77mm
- Winding height HVC 19mm
- Winding material Copper
- Former material Kapton
Magnet
- Flux density B 1.8T
- Force factor Bl 18.6N/A
- Motor constant Bl/√RE 7.72N/√W
- Air gap height HAG 10mm
- Material Ceramic
Diaphragm
- Effective diameter 249mm
- Effective area SD 487cm²
- Moving mass MMS 55g
- Moving mass (without air load) MMD 47g
- Material Polyester
Suspensions
- Stiffness KMS 5.88N/mm
- Compliance CMS 170µm/N
- Equivalent volume to the compliance VAS 57L
- Mechanical resistance RMS 3.21N·s/m
Dimensions
- Nominal diameter 12″
- 318mm
- Overall diameter 318mm
- Baffle cutout diameter 285mm
- Overall depth 166mm
- Volume occupied by the driver (estimated) 3.5L
- Net weight 7.75kg
- Frame material Cast Aluminum
.png)
.png)
.png)
Export this driver to a simulation software:
Closed Box Simulator·





