BRAX MATRIX ML10
4Ω
Subwoofer
| Nominal diameter | 10″ / 250 mm |
| Resonance | 35 Hz |
| Q factor | 0.46 |
| Sensitivity | 87.1 dB |
| Linear excursion | ± 12.5 mm |
| Program Power | 1200 W |
Discontinued
.png)
.png)
.png)
Specifications
- Sensitivity (1W, 1m, infinite baffle) SPL1W 87.1dB
Thiele & Small parameters
- Resonance frequency (free air) fS 35Hz
- Mechanical quality factor QMS 8.10
- Electrical quality factor QES 0.49
- Total quality factor QTS 0.46
Large signal parameters
- Maximum linear excursion xmax 12.5mm
- Air volume displaced at xmax VD 433cm³
- Power handling P 600W
- Program power Pmax 1200W
Voice Coil
- Nominal impedance Z 4Ω
- DC resistance RE 3.4Ω
- Inductance (1kHz, estimated) LE 1.5mH
- VC Diameter 65mm
- Winding height HVC 33mm
Magnet
- Force factor Bl 11.6N/A
- Motor constant Bl/√RE 6.29N/√W
Diaphragm
- Effective diameter 210mm
- Effective area SD 346cm²
- Moving mass MMS 89g
- Moving mass (without air load) MMD 84.1g
- Material Paper cone with “MicroSphere” coating consisting of micro ceramic hollow spheres embedded in a polymer layer
Suspensions
- Stiffness KMS 4.15N/mm
- Compliance CMS 241µm/N
- Equivalent volume to the compliance VAS 40L
- Mechanical resistance RMS 2.37N·s/m
Dimensions
- Nominal diameter 10″
- 250mm
- Overall diameter 275mm
- Baffle cutout diameter 235mm
- Mounting depth 114mm
- Volume occupied by the driver (estimated) 1.9L
Export this driver to a simulation software:
Closed Box Simulator·
Speakerbench
WinISD
Basta!
Hornresp
QSpeakers
SpeakerSim
MfbLabs.jpg.webp)
.png.webp)
.jpg.webp)