BRAX MATRIX ML8 MID
4Ω
Mid Bass
| Nominal diameter | 8″ / 200 mm |
| Resonance | 45 Hz |
| Q factor | 0.58 |
| Sensitivity | 87.6 dB |
| Linear excursion | ± 6 mm |
| Program Power | 400 W |
.jpg)
.jpg)
.jpg)
Specifications
- Sensitivity (1W, 1m, infinite baffle) SPL1W 87.6dB
Thiele & Small parameters
- Resonance frequency (free air) fS 45Hz
- Mechanical quality factor QMS 12.14
- Electrical quality factor QES 0.61
- Total quality factor QTS 0.58
Large signal parameters
- Maximum linear excursion (one way) xmax 6mm
- Air volume displaced at xmax VD 131cm³
- Power handling P 200W
- Program power Pmax 400W
Voice Coil
- Nominal impedance Z 4Ω
- DC resistance RE 3.4Ω
- Inductance (1kHz, estimated) LE 0.79mH
- VC Diameter 37mm
- Winding height HVC 18mm
Magnet
- Force factor Bl 7.4N/A
- Motor constant Bl/√RE 4.01N/√W
Diaphragm
- Effective diameter 167mm
- Effective area SD 219cm²
- Moving mass MMS 33.9g
- Moving mass (without air load) MMD 31.4g
Suspensions
- Stiffness KMS 2.85N/mm
- Compliance CMS 351µm/N
- Equivalent volume to the compliance VAS 24L
- Mechanical resistance RMS 0.81N·s/m
Dimensions
- Nominal diameter 8″
- 200mm
- Overall diameter 222mm
- Baffle cutout diameter 191mm
- Mounting depth 92mm
- Volume occupied by the driver (estimated) 1.1L
Export this driver to a simulation software:
Closed Box Simulator·
Speakerbench
WinISD
Basta!
Hornresp
QSpeakers
SpeakerSim
MfbLabs
Amplion.jpg.webp)
.webp.webp)
.png.webp)