Celestion FTR12-3070C
8Ω
Low frequency
Nominal diameter | 12″ / 305 mm |
Resonance | 65.1 Hz |
Q factor | 0.32 |
Sensitivity | 96.3 dB |
Linear excursion | ± 5.5 mm |
Program Power | 700 W |
.png)
.png)
- Sensitivity (1W, 1m, infinite baffle) SPL1W 96.3dB
- Frequency response 40 - 4000Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 65.1Hz
- Mechanical quality factor QMS 2.80
- Electrical quality factor QES 0.36
- Total quality factor QTS 0.32
Large signal parameters
- Maximum linear excursion xmax 5.5mm
- Air volume displaced at xmax VD 292cm³
- Power handling P 350W
- Program power Pmax 700W
Voice Coil
- Nominal impedance Z 8Ω
- DC resistance RE 5.6Ω
- Inductance (1kHz) LE 1.09mH
- VC Diameter 75mm
- Winding height HVC 16mm
- Winding material Round copper
- Former material Glass fibre
Magnet
- Force factor Bl 18.6N/A
- Motor constant Bl/√RE 7.86N/√W
- Air gap height HAG 10mm
- Weight 2.3kg
- Material Ferrite
Diaphragm
- Effective diameter 260mm
- Effective area SD 531cm²
- Moving mass MMS 54.6g
- Moving mass (without air load) MMD 45.8g
- Material Glass loaded paper (weather-resistant)
Suspensions
- Stiffness KMS 9.09N/mm
- Compliance CMS 110µm/N
- Equivalent volume to the compliance VAS 43.7L
- Mechanical resistance RMS 7.96N·s/m
- Surround material Cloth-sealed
Dimensions
- Nominal diameter 12″
- 305mm
- Overall diameter 318mm
- Baffle cutout diameter 286mm
- Overall depth 102mm
- Volume occupied by the driver (estimated) 2.2L
- Net weight 6.3kg
- Frame material Cast aluminium
.jpg)
Export this driver to a simulation software:
Closed Box Simulator·





