Celestion TF0818
8Ω
Low frequency
Nominal diameter | 8″ / 203 mm |
Resonance | 100 Hz |
Q factor | 0.43 |
Sensitivity | 94.2 dB |
Linear excursion | ± 5 mm |
Program Power | 200 W |
.png)
.png)
.jpg)
- Sensitivity (1W, 1m, infinite baffle) SPL1W 94.2dB
- Frequency response 70 - 6000Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 100Hz
- Mechanical quality factor QMS 3.31
- Electrical quality factor QES 0.49
- Total quality factor QTS 0.43
Large signal parameters
- Maximum linear excursion xmax 5mm
- Air volume displaced at xmax VD 114cm³
- Power handling P 100W
- Program power Pmax 200W
Voice Coil
- Nominal impedance Z 8Ω
- DC resistance RE 6.7Ω
- Inductance (1kHz) LE 0.75mH
- VC Diameter 44mm
- Winding height HVC 13mm
- Winding material Round copper
- Former material Polyimide
Magnet
- Force factor Bl 13N/A
- Motor constant Bl/√RE 5N/√W
- Air gap height HAG 6mm
- Weight 0.88kg
- Material Ferrite
Diaphragm
- Effective diameter 170mm
- Effective area SD 227cm²
- Moving mass MMS 19.6g
- Moving mass (without air load) MMD 17.1g
- Material Kevlar loaded paper
Suspensions
- Stiffness KMS 7.69N/mm
- Compliance CMS 130µm/N
- Equivalent volume to the compliance VAS 9.44L
- Mechanical resistance RMS 3.72N·s/m
- Surround material Cloth-sealed
Dimensions
- Nominal diameter 8″
- 203mm
- Overall diameter 208mm
- Baffle cutout diameter 183mm
- Overall depth 99mm
- Volume occupied by the driver (estimated) 0.87L
- Net weight 2.3kg
- Frame material Pressed steel
.jpg)
.png)
Export this driver to a simulation software:
Closed Box Simulator·





