Celestion TF1530
8Ω
Low frequency
Nominal diameter | 15″ / 381 mm |
Resonance | 42 Hz |
Q factor | 0.28 |
Sensitivity | 97.1 dB |
Linear excursion | ± 4 mm |
Program Power | 800 W |
.png)
.png)
.jpg)
- Sensitivity (1W, 1m, infinite baffle) SPL1W 97.1dB
- Frequency response 40 - 3000Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 42Hz
- Mechanical quality factor QMS 2.73
- Electrical quality factor QES 0.31
- Total quality factor QTS 0.28
Large signal parameters
- Maximum linear excursion xmax 4mm
- Air volume displaced at xmax VD 342cm³
- Power handling P 400W
- Program power Pmax 800W
Voice Coil
- Nominal impedance Z 8Ω
- DC resistance RE 5.8Ω
- Inductance (1kHz) LE 0.96mH
- VC Diameter 75mm
- Winding height HVC 12mm
- Winding material Round copper
- Former material Polyimide
Magnet
- Force factor Bl 21.2N/A
- Motor constant Bl/√RE 8.8N/√W
- Air gap height HAG 8mm
- Weight 2.44kg
- Material Ferrite
Diaphragm
- Effective diameter 330mm
- Effective area SD 855cm²
- Moving mass MMS 91.7g
- Moving mass (without air load) MMD 74.3g
- Material Kevlar loaded paper
Suspensions
- Stiffness KMS 6.25N/mm
- Compliance CMS 160µm/N
- Equivalent volume to the compliance VAS 162L
- Mechanical resistance RMS 8.87N·s/m
- Surround material Cloth-sealed
Dimensions
- Nominal diameter 15″
- 381mm
- Overall diameter 385mm
- Baffle cutout diameter 352mm
- Overall depth 163mm
- Volume occupied by the driver (estimated) 3.6L
- Net weight 6.9kg
- Frame material Pressed steel
.jpg)
.png)
Export this driver to a simulation software:
Closed Box Simulator·





