Ciare PWA10.64
8Ω
Woofer
| Nominal diameter | 10″ / 250 mm |
| Resonance | 73 Hz |
| Q factor | 0.38 |
| Sensitivity | 95.1 dB |
| Linear excursion | ± 4.5 mm |
| Program Power | 600 W |
.jpg)
Specifications
- Sensitivity (1W, 1m, infinite baffle) SPL1W 95.1dB
- Frequency response 60 - 4000Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 73Hz
- Mechanical quality factor QMS 8.45
- Electrical quality factor QES 0.40
- Total quality factor QTS 0.38
Large signal parameters
- Maximum linear excursion xmax 4.5mm
- Maximum excursion before damage xlim 22mm
- Air volume displaced at xmax VD 156cm³
- Power handling P 300W
- Program power Pmax 600W
Voice Coil
- Nominal impedance Z 8Ω
- DC resistance RE 5.2Ω
- Inductance (1kHz) LE 0.85mH
- VC Diameter 64mm
- Winding height HVC 13mm
- Winding material Copper
- Former material Glass Fiber
Magnet
- Force factor Bl 14.4N/A
- Motor constant Bl/√RE 6.31N/√W
- Air gap height HAG 8mm
- Material Ferrite
Diaphragm
- Effective diameter 210mm
- Effective area SD 346cm²
- Moving mass MMS 34g
- Moving mass (without air load) MMD 29.3g
- Material Water repellent
Suspensions
- Stiffness KMS 7.3N/mm
- Compliance CMS 137µm/N
- Equivalent volume to the compliance VAS 23L
- Mechanical resistance RMS 1.85N·s/m
- Surround material M-Roll - Polycotton
Dimensions
- Nominal diameter 10″
- 250mm
- Overall diameter 257mm
- Baffle cutout diameter 233mm
- Overall depth 109mm
- Flange thickness 10mm
- Mounting depth 99mm
- Volume occupied by the driver (estimated) 1.5L
- Net weight 4.0kg
- Frame material Steel
.png)
.png)
Export this driver to a simulation software:
Closed Box Simulator·
Speakerbench
WinISD
Basta!
Hornresp
QSpeakers
SpeakerSim
MfbLabs.jpg.webp)
.jpg.webp)
.jpg.webp)