Eminence KAPPALITE 3012LF
8Ω
Low frequency
Nominal diameter | 12″ / 305 mm |
Resonance | 37 Hz |
Q factor | 0.32 |
Sensitivity | 93.4 dB |
Linear excursion | ± 9.1 mm |
Program Power | 900 W |
.jpg)
.jpg)
.jpg)
- Sensitivity (1W, 1m, infinite baffle) SPL1W 93.4dB
- Frequency response 46 - 2000Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 37Hz
- Mechanical quality factor QMS 6.94
- Electrical quality factor QES 0.34
- Total quality factor QTS 0.32
Large signal parameters
- Maximum linear excursion xmax 9.1mm
- Maximum excursion before damage xlim 14.5mm
- Air volume displaced at xmax VD 496cm³
- Power handling P 450W
- Program power Pmax 900W
Voice Coil
- Nominal impedance Z 8Ω
- DC resistance RE 5.6Ω
- Inductance (1kHz) LE 0.98mH
- VC Diameter 76.2mm
- Winding material Copper
- Former material Kapton
Magnet
- Force factor Bl 16.7N/A
- Motor constant Bl/√RE 7.06N/√W
- Air gap height HAG 9.3mm
- Weight 0.312kg
- Material Neodymium
Diaphragm
- Effective diameter 264mm
- Effective area SD 545cm²
- Moving mass MMS 72g
- Moving mass (without air load) MMD 63g
- Material Treated paper
Suspensions
- Stiffness KMS 3.85N/mm
- Compliance CMS 260µm/N
- Equivalent volume to the compliance VAS 107L
- Mechanical resistance RMS 2.41N·s/m
- Surround material Sealed cloth
Dimensions
- Nominal diameter 12″
- 305mm
- Overall diameter 314mm
- Baffle cutout diameter 281mm
- Overall depth 152mm
- Volume occupied by the driver 1.56L
- Net weight 3.447kg
- Frame material Die-cast Aluminium
.png)
Export this driver to a simulation software:
Closed Box Simulator·





