Eminence KAPPA PRO-12A
8Ω
Mid Bass
Nominal diameter | 12″ / 305 mm |
Resonance | 37 Hz |
Q factor | 0.24 |
Sensitivity | 95 dB |
Linear excursion | ± 4.8 mm |
Program Power | 1000 W |
.jpg)
.jpg)
.jpg)
- Sensitivity (1W, 1m, infinite baffle) SPL1W 95dB
- Frequency response 57 - 2800Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 37Hz
- Mechanical quality factor QMS 6.93
- Electrical quality factor QES 0.25
- Total quality factor QTS 0.24
Large signal parameters
- Maximum linear excursion xmax 4.8mm
- Maximum excursion before damage xlim 14.8mm
- Air volume displaced at xmax VD 249cm³
- Power handling P 500W
- Program power Pmax 1000W
Voice Coil
- Nominal impedance Z 8Ω
- DC resistance RE 5.5Ω
- Inductance (1kHz) LE 1.22mH
- VC Diameter 76.2mm
- Winding material Copper
- Former material Polyimide
Magnet
- Force factor Bl 17.3N/A
- Motor constant Bl/√RE 7.4N/√W
- Air gap height HAG 9.5mm
- Weight 2.268kg
- Material Ferrite
Diaphragm
- Effective diameter 257mm
- Effective area SD 520cm²
- Moving mass MMS 59g
- Moving mass (without air load) MMD 50.5g
- Material Paper
Suspensions
- Stiffness KMS 3.13N/mm
- Compliance CMS 320µm/N
- Equivalent volume to the compliance VAS 121L
- Mechanical resistance RMS 1.98N·s/m
- Surround material Cloth
Dimensions
- Nominal diameter 12″
- 305mm
- Overall diameter 314mm
- Baffle cutout diameter 281mm
- Overall depth 158mm
- Volume occupied by the driver 2.55L
- Net weight 7.53kg
- Frame material Die-cast Aluminium
.png)
Export this driver to a simulation software:
Closed Box Simulator·





