Eminence WHEEL HOUSE 200

• Sensitivity (1W, 1m, infinite baffle) SPL1W 101.4dB
• Frequency response 60 - 3500Hz

Thiele & Small parameters

• Resonance frequency (free air) fS 51Hz
• Mechanical quality factor QMS 16.85
• Electrical quality factor QES 0.46
• Total quality factor QTS 0.45

Large signal parameters

• Maximum linear excursion xmax 2.2mm
• Air volume displaced at xmax VD 176cm³
• Power handling P 200W
• Program power Pmax 400W

Voice Coil

• Nominal impedance Z 8Ω
• DC resistance RE 7.5Ω
• Inductance (1kHz) LE 0.46mH
• VC Diameter 64mm
• Winding material Edge Wound Aluminum
• Former material Polyimide

Magnet

• Force factor Bl 15.6N/A
• Motor constant Bl/√RE 5.69N/√W
• Air gap height HAG 9.5mm
• Weight 0.312kg
• Material Neodymium

Diaphragm

• Effective diameter 317mm
• Effective area SD 792cm²
• Moving mass MMS 47g
• Moving mass (without air load) MMD 31g

Suspensions

• Stiffness KMS 4.76N/mm
• Compliance CMS 210µm/N
• Equivalent volume to the compliance VAS 183L
• Mechanical resistance RMS 0.89N·s/m
• Surround material Full molded paper

Dimensions

• Nominal diameter 15″
• 381mm
• Overall diameter 385mm
• Baffle cutout diameter 352mm
• Overall depth 143mm
• Volume occupied by the driver 3.62L
• Net weight 3.72kg
• Frame material Pressed steel