Oberton 15L400
8Ω
Subwoofer
Nominal diameter | 15″ / 381 mm |
Resonance | 43.3 Hz |
Q factor | 0.29 |
Sensitivity | 100.9 dB |
Linear excursion | ± 3.3 mm |
Program Power | 800 W |
.jpg)
- Sensitivity (1W, 1m, infinite baffle) SPL1W 100.9dB
- Frequency response 45 - 4000Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 43.3Hz
- Mechanical quality factor QMS 11.56
- Electrical quality factor QES 0.29
- Total quality factor QTS 0.29
Large signal parameters
- Maximum linear excursion xmax 3.3mm
- Air volume displaced at xmax VD 270cm³
- Power handling P 400W
- Program power Pmax 800W
Voice Coil
- Nominal impedance Z 8Ω
- DC resistance RE 5.5Ω
- Inductance (1kHz) LE 0.62mH
- VC Diameter 64mm
- Winding height HVC 11mm
- Winding material Aluminium
- Former material Kapton
Magnet
- Flux density B 1.35T
- Force factor Bl 16.9N/A
- Motor constant Bl/√RE 7.23N/√W
- Air gap height HAG 9mm
- Material Ferrite
Diaphragm
- Effective diameter 325mm
- Effective area SD 830cm²
- Moving mass MMS 56.6g
- Moving mass (without air load) MMD 39.7g
- Material Paper
Suspensions
- Stiffness KMS 4.18N/mm
- Compliance CMS 239µm/N
- Equivalent volume to the compliance VAS 230L
- Mechanical resistance RMS 1.33N·s/m
Dimensions
- Nominal diameter 15″
- 381mm
- Overall diameter 388mm
- Baffle cutout diameter 352mm
- Overall depth 165mm
- Volume occupied by the driver (estimated) 3.8L
- Net weight 7.25kg
- Frame material Die cast aluminium
.png)
.png)
Export this driver to a simulation software:
Closed Box Simulator·





