Fi Car Audio BTL3 18 D2
2x1Ω
2x2Ω
Subwoofer
Nominal diameter | 18″ / 470 mm |
Resonance | 32.3 Hz |
Q factor | 0.35 |
Sensitivity | 92.3 dB |
Linear excursion | ± 34 mm |
Program Power | 5000 W |
.png)
.png)
.png)
- Sensitivity (1W, 1m, infinite baffle) SPL1W 92.3dB
Thiele & Small parameters
- Resonance frequency (free air) fS 32.3Hz
- Mechanical quality factor QMS 7.52
- Electrical quality factor QES 0.38
- Total quality factor QTS 0.35
Large signal parameters
- Maximum linear excursion xmax 34mm
- Air volume displaced at xmax VD 4114cm³
- Power handling P 2500W
- Program power Pmax 5000W
Voice Coil
- Nominal impedance Z 2 x 2Ω
- DC resistance (in series) RE 3.6Ω
- Inductance (1kHz, in series, estimated) LE 4.3mH
Magnet
- Force factor (in series) Bl 28.2N/A
- Motor constant Bl/√RE 14.9N/√W
Diaphragm
- Effective diameter 393mm
- Effective area SD 1210cm²
- Moving mass MMS 399g
- Moving mass (without air load) MMD 369g
Suspensions
- Stiffness KMS 16.6N/mm
- Compliance CMS 60.4µm/N
- Equivalent volume to the compliance VAS 125L
- Mechanical resistance RMS 10.8N·s/m
Dimensions
- Nominal diameter 18″
- 470mm
- Overall diameter 470mm
- Baffle cutout diameter 425mm
- Mounting depth 241mm
- Volume occupied by the driver 2.83L
Export this driver to a simulation software:
Closed Box Simulator·





