Fi Car Audio TEAM 12 D1
2x1Ω
2x2ΩSubwoofer
| Nominal diameter | 12″ / 318 mm |
| Resonance | 34.3 Hz |
| Q factor | 0.35 |
| Sensitivity | 85.1 dB |
| Linear excursion | ± 33 mm |
| Program Power | 8000 W |
Discontinued
.jpg)
.jpg)
.jpg)
Specifications
- Sensitivity (1W, 1m, infinite baffle) SPL1W 85.1dB
Thiele & Small parameters
- Resonance frequency (free air) fS 34.3Hz
- Mechanical quality factor QMS 7.93
- Electrical quality factor QES 0.36
- Total quality factor QTS 0.35
Large signal parameters
- Maximum linear excursion xmax 33mm
- Air volume displaced at xmax VD 1584cm³
- Power handling P 4000W
- Program power Pmax 8000W
Voice Coil
- Nominal impedance Z 2 x 1Ω
- DC resistance (in series) RE 1.5Ω
- Inductance (1kHz, in series, estimated) LE 1.82mH
Magnet
- Force factor (in series) Bl 19N/A
- Motor constant Bl/√RE 15.5N/√W
Diaphragm
- Effective diameter 247mm
- Effective area SD 480cm²
- Moving mass MMS 408g
- Moving mass (without air load) MMD 400g
Suspensions
- Stiffness KMS 18.9N/mm
- Compliance CMS 53µm/N
- Equivalent volume to the compliance VAS 17.2L
- Mechanical resistance RMS 11.1N·s/m
Dimensions
- Nominal diameter 12″
- 318mm
- Overall diameter 318mm
- Baffle cutout diameter 283mm
- Mounting depth 286mm
- Volume occupied by the driver 5.38L
Export this driver to a simulation software:
Closed Box Simulator·
Speakerbench
WinISD
Basta!
Hornresp
QSpeakers
SpeakerSim
MfbLabs.png.webp)
.png.webp)
.jpg.webp)