Goldwood GW-1038
8Ω
Woofer
| Nominal diameter | 10″ / 254 mm |
| Resonance | 33.7 Hz |
| Q factor | 1.10 |
| Sensitivity | 87.1 dB |
| Linear excursion | ± 2.5 mm |
| Program power | 250 W |
.jpg)
.jpg)
.jpg)
Specifications
- Sensitivity (1W, 1m, infinite baffle) SPL1W 87.1dB
- Frequency response 29 - 6000Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 33.7Hz
- Mechanical quality factor QMS 4.40
- Electrical quality factor QES 1.50
- Total quality factor QTS 1.10
Large signal parameters
- Maximum linear excursion (one way) xmax 2.5mm
- Air volume displaced at xmax VD 89cm³
- Power handling P 130W
- Program power Pmax 250W
Voice Coil
- Nominal impedance Z 8Ω
- DC resistance RE 7.2Ω
- Inductance (1kHz) LE 0.6mH
- VC Diameter 38.1mm
- Winding material Aluminum
Magnet
- Force factor Bl 6.8N/A
- Motor constant Bl/√RE 2.53N/√W
- Weight 0.85kg
Diaphragm
- Effective diameter 213mm
- Effective area SD 355cm²
- Moving mass (including air load) MMS 43.7g
- Moving mass MMD 39g
- Material Poly-Mica
Suspensions
- Stiffness KMS 1.96N/mm
- Compliance CMS 509µm/N
- Equivalent volume to the compliance VAS 90.3L
- Mechanical resistance RMS 2.1N·s/m
- Surround material Butyl Rubber
Dimensions
- Nominal diameter 10″
- 254mm
- Overall diameter 254mm
- Baffle cutout diameter 235mm
- Mounting depth 105mm
- Volume occupied by the driver (estimated) 0.77L
- Net weight 1.871kg
- Frame material Stamped Steel
.png)
Export this driver to a box design software:
Closed Box Simulator·
Speakerbench
WinISD
Basta!
Hornresp
QSpeakers
SpeakerSim
MfbLabs
Amplion.jpg.webp)
.jpg.webp)
.jpg.webp)
.jpg.webp)