Hertz Cento C 165 F
4Ω
Woofer
Nominal diameter | 6.5″ / 165 mm |
Resonance | 80 Hz |
Q factor | 0.80 |
Sensitivity | 88.4 dB |
Linear excursion | ± 3.2 mm |
Program Power | 180 W |
.jpg)
.jpg)
.jpg)
- Sensitivity (1W, 1m, infinite baffle) SPL1W 88.4dB
- Frequency response 65 - 5000Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 80Hz
- Mechanical quality factor QMS 3.40
- Electrical quality factor QES 1.00
- Total quality factor QTS 0.80
Large signal parameters
- Maximum linear excursion xmax 3.2mm
- Maximum excursion before damage xlim 3.5mm
- Air volume displaced at xmax VD 45cm³
- Power handling P 70W
- Program power Pmax 180W
Voice Coil
- Nominal impedance Z 4Ω
- DC resistance RE 2.7Ω
- Inductance (1kHz) LE 0.154mH
- VC Diameter 25mm
Magnet
- Force factor Bl 3.9N/A
- Motor constant Bl/√RE 2.37N/√W
- Diameter 90mm
- Height 10mm
- Material Ferrite
Diaphragm
- Effective diameter 134mm
- Effective area SD 142cm²
- Moving mass MMS 12g
- Moving mass (without air load) MMD 10.8g
- Material Semi-Pressed paper with Mica
Suspensions
- Stiffness KMS 3.03N/mm
- Compliance CMS 330µm/N
- Equivalent volume to the compliance VAS 9.4L
- Mechanical resistance RMS 1.77N·s/m
Dimensions
- Nominal diameter 6.5″
- 165mm
- Overall diameter 165mm
- Baffle cutout diameter 141mm
- Overall depth 51mm
- Flange thickness 7mm
- Mounting depth 44mm
- Volume occupied by the driver (estimated) 0.23L
- Net weight 0.72kg
.png)
Export this driver to a simulation software:
Closed Box Simulator·





