Hertz Cento CS 300 S4
2Ω
4Ω
Subwoofer
Nominal diameter | 12″ / 300 mm |
Resonance | 25 Hz |
Q factor | 0.47 |
Sensitivity | 86.7 dB |
Linear excursion | ± 12.5 mm |
Program Power | 700 W |
.jpg)
.jpg)
.jpg)
- Sensitivity (1W, 1m, infinite baffle) SPL1W 86.7dB
Thiele & Small parameters
- Resonance frequency (free air) fS 25Hz
- Mechanical quality factor QMS 7.20
- Electrical quality factor QES 0.50
- Total quality factor QTS 0.47
Large signal parameters
- Maximum linear excursion xmax 12.5mm
- Maximum excursion before damage xlim 16.5mm
- Air volume displaced at xmax VD 700cm³
- Power handling P 350W
- Program power Pmax 700W
Voice Coil
- Nominal impedance Z 4Ω
- DC resistance RE 3.6Ω
- Inductance (1kHz) LE 3.64mH
- VC Diameter 35mm
Magnet
- Force factor Bl 14.8N/A
- Motor constant Bl/√RE 7.8N/√W
- Diameter 134mm
- Height 34mm
- Material Ferrite
Diaphragm
- Effective diameter 268mm
- Effective area SD 560cm²
- Moving mass MMS 193g
- Moving mass (without air load) MMD 184g
- Material Polypropylene
Suspensions
- Stiffness KMS 4.76N/mm
- Compliance CMS 210µm/N
- Equivalent volume to the compliance VAS 93.4L
- Mechanical resistance RMS 4.21N·s/m
Dimensions
- Nominal diameter 12″
- 300mm
- Overall diameter 318mm
- Baffle cutout diameter 281mm
- Overall depth 147mm
- Flange thickness 17mm
- Mounting depth 130mm
- Volume occupied by the driver (estimated) 2.4L
- Net weight 4.844kg
.png)
Export this driver to a simulation software:
Closed Box Simulator·





