Hertz Mille MPS 300 S4
2Ω
4Ω
Subwoofer
Nominal diameter | 12″ / 300 mm |
Resonance | 23 Hz |
Q factor | 0.42 |
Sensitivity | 84.3 dB |
Linear excursion | ± 16.8 mm |
Program Power | 1000 W |
.jpg)
.jpg)
.jpg)
- Sensitivity (1W, 1m, infinite baffle) SPL1W 84.3dB
- Frequency response 25 - 400Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 23Hz
- Mechanical quality factor QMS 6.30
- Electrical quality factor QES 0.45
- Total quality factor QTS 0.42
Large signal parameters
- Maximum linear excursion xmax 16.8mm
- Maximum excursion before damage xlim 20mm
- Air volume displaced at xmax VD 908cm³
- Power handling P 500W
- Program power Pmax 1000W
Voice Coil
- Nominal impedance Z 4Ω
- DC resistance RE 3.4Ω
- Inductance (1kHz) LE 3.75mH
- VC Diameter 38mm
Magnet
- Force factor Bl 18.7N/A
- Motor constant Bl/√RE 10.1N/√W
- Diameter 156mm
- Height 36mm
- Material Ferrite
Diaphragm
- Effective diameter 263mm
- Effective area SD 540cm²
- Moving mass MMS 320g
- Moving mass (without air load) MMD 311g
- Material Polypropylene
Suspensions
- Stiffness KMS 6.67N/mm
- Compliance CMS 150µm/N
- Equivalent volume to the compliance VAS 62.1L
- Mechanical resistance RMS 7.34N·s/m
Dimensions
- Nominal diameter 12″
- 300mm
- Overall diameter 318mm
- Baffle cutout diameter 283mm
- Overall depth 109mm
- Flange thickness 21mm
- Mounting depth 88mm
- Volume occupied by the driver (estimated) 2.4L
- Net weight 6.64kg
.png)
Export this driver to a simulation software:
Closed Box Simulator·





