Hertz Mille MP 300 D4.3 PRO
2x2Ω
2x4Ω
Subwoofer
Nominal diameter | 12″ / 300 mm |
Resonance | 24 Hz |
Q factor | 0.42 |
Sensitivity | 85.3 dB |
Linear excursion | ± 17 mm |
Program Power | 1200 W |
.png)
.png)
.png)
- Sensitivity (1W, 1m, infinite baffle) SPL1W 85.3dB
Thiele & Small parameters
- Resonance frequency (free air) fS 24Hz
- Mechanical quality factor QMS 5.90
- Electrical quality factor QES 0.45
- Total quality factor QTS 0.42
Large signal parameters
- Maximum linear excursion xmax 17mm
- Maximum excursion before damage xlim 27mm
- Air volume displaced at xmax VD 891cm³
- Power handling P 600W
- Program power Pmax 1200W
Voice Coil
- Nominal impedance Z 2 x 4Ω
- DC resistance (in series) RE 7.6Ω
- Inductance (1kHz, in series) LE 6.4mH
- VC Diameter 65mm
Magnet
- Force factor (in series) Bl 24N/A
- Motor constant Bl/√RE 8.71N/√W
- Diameter 165mm
- Height 35mm
- Material Ferrite
Diaphragm
- Effective diameter 260mm
- Effective area SD 524cm²
- Moving mass MMS 235g
- Moving mass (without air load) MMD 226g
- Material Water-repellent pressed paper
Suspensions
- Stiffness KMS 5.26N/mm
- Compliance CMS 190µm/N
- Equivalent volume to the compliance VAS 74L
- Mechanical resistance RMS 6.01N·s/m
Dimensions
- Nominal diameter 12″
- 300mm
- Overall diameter 321mm
- Baffle cutout diameter 287mm
- Overall depth 187mm
- Flange thickness 23mm
- Mounting depth 164mm
- Volume occupied by the driver (estimated) 4.1L
- Net weight 8.63kg
.png)
Export this driver to a simulation software:
Closed Box Simulator·





