HiFonics MERCURY MRW84
4Ω
Subwoofer
| Nominal diameter | 8″ / 200 mm |
| Resonance | 42.6 Hz |
| Q factor | 0.49 |
| Sensitivity | 84.8 dB |
| Linear excursion | ± 6.5 mm |
| Program Power | 600 W |
.jpg)
.jpg)
.jpg)
Specifications
- Sensitivity (1W, 1m, infinite baffle) SPL1W 84.8dB
Thiele & Small parameters
- Resonance frequency (free air) fS 42.6Hz
- Mechanical quality factor QMS 4.53
- Electrical quality factor QES 0.55
- Total quality factor QTS 0.49
Large signal parameters
- Maximum linear excursion (one way) xmax 6.5mm
- Maximum excursion before damage xlim 13mm
- Air volume displaced at xmax VD 144cm³
- Power handling P 300W
- Program power Pmax 600W
Voice Coil
- Nominal impedance Z 4Ω
- DC resistance RE 2.8Ω
- Inductance (1kHz) LE 1.34mH
- VC Diameter 50mm
- Winding height HVC 19mm
- Former material Aluminium
Magnet
- Force factor Bl 10N/A
- Motor constant Bl/√RE 5.98N/√W
- Diameter 120mm
- Height 20mm
- Weight 0.851kg
- Material Y25
Diaphragm
- Effective diameter 168mm
- Effective area SD 222cm²
- Moving mass MMS 73.2g
- Moving mass (without air load) MMD 70.8g
- Material Non-pressed paper
Suspensions
- Stiffness KMS 5.35N/mm
- Compliance CMS 187µm/N
- Equivalent volume to the compliance VAS 13.1L
- Mechanical resistance RMS 4.33N·s/m
- Surround material Rubber
Dimensions
- Nominal diameter 8″
- 200mm
- Overall diameter 209mm
- Baffle cutout diameter 182mm
- Mounting depth 105mm
- Volume occupied by the driver (estimated) 1.4L
- Net weight 3.4kg
- Frame material Steel
Export this driver to a simulation software:
Closed Box Simulator·
Speakerbench
WinISD
Basta!
Hornresp
QSpeakers
SpeakerSim
MfbLabs
Amplion
.jpg.webp)
.jpg.webp)
.jpg.webp)